Home > Product > PPGI / PPGL Coil Sheet > PPGI PPGL Coil

PPGI / PPGL Coil Sheet



Product NamePPGI / PPGL
Width600-1450mm, according to customer's requirement
Thickness0.12 mm-1.50mm
Top Coated Thickness10μm -25μm
Back Coated Thickness5μm -25μm
ColorAccording RAL,or according to the sample
MOQ 20tons20tons
Coated MaterialPE,SMP,PVDF Coated
Productivity300,000 tons / year
Coil InnerDiameter 508mm/610mm
Coil Outer800mm-1500mm
Packagingseaworthy package, according to the customers’requirement
PortQingdao, Tianjin
Coating struction1/1,2/1,2/2(1=1layer coating)
Delivery timeIn 10-35 days after receipt of deposit or L/C

Two prepainted galvanized steel lines with annual output of 400,000 tons. The production line adopts double - coated  & double - drying processing technology, which can produce single - sided ppgi , double - sided ppgi, wrinkled ppgi, and printed ppgi. The paints use Akzonobel, Nippon, winter as its trademarks which are famous in home and abroad , material including PE,SMP, HDP, PVDF etc. the paint film can reach 30 microns. Zhongcansteel export 150000tons ppgi annually, and Successfully establish sales agents in uzbekistan, Thailand, South Africa, Brazil. Etc. 

Our service

For steel coils, we can cut one large steel coil into small steel coils for loading at seaport; because for container shipping, each container usually loads weight can not be over 26 tons, but each large coil is usually about 28 tons, so one large coils has to be cut into small coils, and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner, each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.

For final application, need open flat the coils and cut the coils into steel plate, so we open flat the coils and cut the coils to steel plate to the sizes as required. For saving cost for loading by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.after cutting the steel coils into steel plate, we can do black paints on the surface of the plate to make the plate to be anti-rust.

PPGI Sheet Lamina / PPGI PPGL Steel Coil as customized Bobina

Contact Information

Contact person: MS. Lina Kong

Email: lina@sdbfsteel.com

WhatsApp: +86 13001709839

WeChat: +86 13001709839

Website: https://northgroup.en.alibaba.com


Address: Room 1503, Building No.2, Qisheng Palace, Xinluo Street, Lixia District, Jinan, Shandong, China.

Back to list
Leave a Message